Page 1 of 1
Nipper 36
Posted: Tue Sep 14, 2010 11:42 am
by ben
I am confused by the plans for the nose wheel. Mine is a Mk 2 and I have plans for a Mk1 and a Mk3 ! The Mk1 plan indicates a large shock absorbing washer (A358) enclosed by two "special washers" A325 and A326 with the bellows over all three. The Mk 3 mentions none of these three washers and appears to have the bellows alone. Certainly the bellows I have fit neatly over the control arm and the other end is roughly the size of the nose leg tube. It certainly couldn't fit over the shock absorbing washer. Any advice?
Ben
Re: Nipper 36
Posted: Tue Sep 21, 2010 9:36 am
by Neil Spooner
Hi Ben,
Where are you based?
Neil
Re: Nipper 36
Posted: Mon Sep 27, 2010 2:15 pm
by aerohar
hello, are you a new owner of Nipper #36? if so, took you over also all the paperstuff including some drawings?? I brought it back from Australia some years ago. there is one drawing I need
if you will help me. the main gear details. thanks, harry van der meer, holland.
Re: Nipper 36
Posted: Mon Sep 27, 2010 6:49 pm
by ben
Harry
No problem. I appear to have lots of drawings-some English(Mk 3) and some French (Mk 1/2). I am more than happy to copy whatever you need and mail them to you. Let me have your address by private E mail.
Regards
Ben
Re: Nipper 36
Posted: Mon Sep 27, 2010 8:18 pm
by aerohar
aerohar@tiscali.nl harry van der meer. thank you.