Hi RiP,
I am located just north of Colchester, Essex. The a/c is based at a strip about a mile from my house. Send me your email address and I will send you a Google Earth placemark.
One of the latest pictures herewith. It is a GPAS (Great Plains Aircraft Supply) engines that I imported about 2 yrs ago as a "kit of parts". I have assembled it myself ( I am a licenced LAA Engineer ) and installed it. Ground runs have been good so far, but I have yet to fit the Dzus fasteners to the cowlings so I can cowl it and run it a full power to set up the Ellison. Everything firewall forward is new except the exhaust system, and every bit of it bespoke and home made........lots and lots of work! So far very pleased, flight testing will tell if the extra 15% hp (up from 65 to 75hp) has been worth all the effort. The oil system is my own design, but yet to be tested inverted. The Acro system, although very good always lost oil pressure during slow/hesitation rolls, I hope this will prevent that, but also give better oil cooling and enhanced manifold ice protection.
Would love to see you in your Nipper, you need a brief before attempting to land here, I also need permission from the strip operator.
All the best,
Neil
Brake discs
-
- Posts: 631
- Location: Ardleigh, Colchester, Essex, UK
- Contact:
Re: Brake discs
- Attachments
-
- 2180 engine (7).JPG (2.94 MiB) Viewed 7242 times
A little help goes a long way.
Nipper G-BRPM and G-BALS
RV4 G-IKON
Nipper G-BRPM and G-BALS
RV4 G-IKON
Re: Brake discs
I am only in Bedford , I can come up by Motorcycle or car some time , I would love to look at your installation . I am a licensed engineer , but not since 30 years ago , and then airline stuff .
Do you consider renting out your suspension rubber fitting gadget , after a hefty deposit is paid ? RiP
robert.ripley@proceq.com
Site is fantastic
Do you consider renting out your suspension rubber fitting gadget , after a hefty deposit is paid ? RiP
robert.ripley@proceq.com
Site is fantastic
-
- Posts: 631
- Location: Ardleigh, Colchester, Essex, UK
- Contact:
Re: Brake discs
Hi RiP,
I am off Mon/Tues', expect to be working on the Nipper......you are more than welcome by any form of transport! Failing then some other time is fine.
Neil
I am off Mon/Tues', expect to be working on the Nipper......you are more than welcome by any form of transport! Failing then some other time is fine.
Neil
A little help goes a long way.
Nipper G-BRPM and G-BALS
RV4 G-IKON
Nipper G-BRPM and G-BALS
RV4 G-IKON
Re: Brake discs
Has anybody looked at using wheels/discs from other aircraft? I've heard that Jabiru wheels/discs can be used, and I've seen other microlight arrangements that can probably be made to fit?? Would make sense if we could use off the shelf items. Are there already such minor mods cleared with LAA?
Re: Brake discs
Has anybody looked at using wheels/discs from other aircraft? I've heard that Jabiru wheels/discs can be used, and I've seen other microlight arrangements that can probably be made to fit?? Would make sense if we could use off the shelf items. Are there already such minor mods cleared with LAA?
Return to “ENGINEERING AND MAINTENANCE”
Who is online
Users browsing this forum: No registered users and 0 guests